Converter
CS-428/9AT-ISO2
– RS232 to RS422/RS485 isolation Converter
– Maximum Communication Speed: 921.6Kbps
– Industrial Grade Temperature: -40~85°C
– Distance: Max. 1.2km
– 3KV Isolation Protector
– Fully compatible with serial COM port in the PC
– External power not required (When DTR signal line is enabled)
– Hardware-based Auto Toggling
– RS422/RS485 mode, Termination and Echo mode selectable by
external switches
– Max. 10 Devices Connectable for RS422 Multi-Drop Mode
– Max. 10 Devices Connectable for RS485 Mode
– Power: 9~12V, 500mA
CS-428/9AT-ISO2 converts RS232 signals to RS422 or RS485 with optical isolation protection. It is a fast and efficient solution to overcome distance limitations of RS232 or for connecting to industrial devices with an RS422/485 interface.
No additional software is required for operation. With an easily accessible DIP switch you can configure the interface for RS422 or RS485. The CS-428/9AT-ISO2 has high performance ±3KV Digital- Isolation to protect your equipment.
What is Isolation?
When electrical shock caused by power or ground is passed on to the system, the whole system can be damaged. However, the internal system can be protected using Isolation technique.
Furthermore, isolation can settle problems caused by signal distortion and signal line impedance matching.
Digital Isolation
The CS-428/9AT-ISO2 Digital-Isolation protects up to DC 2.5kV between RS232 and RS422, RS485 sides. Digital-Isolation perfectly isolates the two endpoints so devices are protected from unfavorable electrical conditions such as ground potential differences, lightning and line interference. This results in more stable and reliable communications.
Auto RTS Control (Auto Toggling)
The CS-428/9AT-ISO2 has a built-in hardware feature that performs automatic toggling to prevent devices from sending data simultaneously. This operation is crucial when multiple devices are connected to prevent electrical collisions that lead to errors and unstable communications.
